2020 144 Build - Moana

Daniel

Member
We recently received a brand new 2020 Sprinter 144 into our shop for a full build named Moana. This build should be really fun as it will have a very unique layout and even a theme designed by the owner.

36A55ADF-5358-4603-8961-A115F1E90F5C.jpeg


The first thing on the to do list is remove factory flooring and get some killmat sound deadening laid down.

84ABA35C-EE38-4BD7-8207-235CAA40896C.jpeg
 
Last edited:

Daniel

Member
Next up we will add the Impact products floor insulation kit which includes two layers of minicell with a layer of 3M TAI between. First we add the strips of minicell between the ridges of the floor.
DAN_7741.jpg


DAN_7743.jpg


Next the layer 3M TAI

DAN_7763.jpg


The next layer of minicell is laid in full sheets over the 3M TAI layer.

DAN_7772.jpg


Finally the stock floor is put back on top and lightly bolted down. We do not tighten it down until we put the final flooring down over the stock floor.

DAN_7781.jpg
 
Last edited:

Daniel

Member
Next up we pull the factory sprinter wiring and protect it by looming over it.
IMG_0226.jpg


We then place it behind the wall so that it is not exposed. This helps to make sure that it is nicely out of the way for any parts of the future build out. A few zip ties later and it will not even be visible.

IMG_0227.jpg
 

Daniel

Member
One thing about the Sprinter vans is that the stock speakers are not very good quality. We needed to add just a bit more sound deadening to the door and some insulation so our client agreed to go ahead and have the doors fitted with better JBL co-axial speakers.

IMG_0399 2.jpg


IMG_0402.jpg
 
Top